I will try teach-in as in this option I use webcam instead probe. So G38 are useless.
Slavko. 2010/3/16 Stephen Wille Padnos <[email protected]> > Andy Pugh wrote: > > On 16 March 2010 14:13, Slavko Kocjancic<[email protected]> wrote: > >> Does someone know for beter way to log some coordinates? > >> > > You might be able to use the G38 probing moves. They log all nine axes > > to the file specified in (PROBEOPEN, filename) > > If the probe conditions are correct before the move I am not sure if > > it exits immediately and logs the point or triggers an error and > > doesn't log. In the first case then you should be able to wire the > > probe input to "true" permanently in HAL and have it work. > > > There are several options for probe moves. I don't know which is which > (it's in the manual here > < > http://linuxcnc.org/docs/2.4/html/gcode_main.html#sub:G38.2:-Straight-Probe > >), > but you can either look for the probe to make or break contact, and you > can independently choose to error or not error if the desired condition > isn't encountered before the end of the move. > > > - Steve > > > > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
