On Tue, 2009-05-12 at 23:18 -0300, Christopher Purcell wrote:
... snip
> To share your involute gear function with another Mathematica user you
> would email them or post on a web site something like the following
> line of text.
>
> d = 1; ParametricPlot[{d (Cos[t] + t Sin[t]), d (-t Cos[t] + Sin[t])},
> {t, 0, 2 Pi}]
>
> PS. I use Mathematica for CAD (for R&D, not production work), and
> program it to generate g-code for EMC2 directly, or have it write out
> text files of coordinates and import these into Catia or Pro/E, when
> they run out of steam.
>
>
> [email protected]
Thanks Chris. It sounds like Mathmatica offers power and flexibility,
but one spends a bit time at the lower end of the learning curve to get
it. I'll have to carve out some time to take a closer look.
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/index.html
California, USA
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
