Kirk Wallace wrote: >In order to post the involute functions, I had to use Inkscape to create >an image, then screen capture. Is there a package that makes working >with and sharing math easier? I'd also like to be able to get function >points into QCAD or make .dxf files with the points. > > Well, depending on what you want to do, "kig" might be good. <http://edu.kde.org/kig/>
It's a drawing/construction/math program that can be used to make diagrams. I tried it a year or two ago, and it could do a lot of things (but not some others, like "put a point 3 inches from the end of this half-line"), but if you need something it doesn't do, well good luck with that :) - Steve ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
