John Thornton wrote: > Doug, > > > > If you can pop over to the EMC forum and post a picture of your machine. > > John > > On 11 Apr 2009 at 13:00, Doug Pollard wrote: > > >> >> Doug >> >> -------------------------------------------------------------------- >> ---------- >> This SF.net email is sponsored by: >> High Quality Requirements in a Collaborative Environment. >> Download a free trial of Rational Requirements Composer Now! >> http://p.sf.net/sfu/www-ibm-com >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > High Quality Requirements in a Collaborative Environment. > Download a free trial of Rational Requirements Composer Now! > http://p.sf.net/sfu/www-ibm-com > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > John ,I guess G code generating was the wrong term I think I knew that Ems2 would not do that. I can program in G codes, though it has been a long time when I ran a Wasino lathe and a Makino Leblond mill some. I was shop foreman so only did this on a limited basis so I am by no means capable as I had many in the shop that could program and run circles around me. I had a 2 axis Bridgeport in my office and a Southbend lathe that I used to make tooling an occasional prototype stuff. My partner who was president fussed at me for having my file cabnets full of chips. I never thought when we sold the buisiness that I would ever want to run a machine again. But now, here I am, at it again. Thanks, Doug
------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
