Hi Tom > I just finished cutting a part that included a pocket that I cut using > the G64 command. The cut was run at 56ipm, which I thought you > might like to see. > ... > http://www.youtube.com/watch?v=Q2Qfor4IWHY
Sweet. :-) Our CNC equipment here is note suitable for (serious) machining of metal, not even aluminum, most parts are made from wood, PS, EPS, PMMA, PC, POM, etc. Meanwhile I started to play around with the live CD. Setup seams to be pretty easy. And the documentation is much easier to read than the Mach3 manual. By the way: Is there a easy way to save all custom settings applied after booting the live CD to a USB drive? Or do I just have to backup/restore the modified ini/conf files? cu Flo ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
