|
I will have to reply to this later tonight, my machine is not here, I
do know that I installed that computer about 4,5,6 months ago from a
freshly downloaded CD from EMC (latest version) and it sat in my house
till I got it out to the machine a couple of weeks ago. I don't know
what I used to set up the hal pins, this is what I will look at
tonight. I think I created a shortcut that is going to the (ini?)files
that I am using to start emc. Tonight I will go and clear my config
files and run the setup per the tutorial John pointed me to and I will
let you know the results. On my other setups I have not had to run
this I have just went in and modified the .ini file and stayed with
what thought was a standard pin out on the LPT port. Andy Ray Henry wrote: On Wed, 2008-09-03 at 09:17 -0500, Andy Holcomb wrote:These are the hal files that I got with the install cd. I went through the hal setup gui and changed the pinout on the lpt port and that was all I changed in the hal files. |
------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
