I tested emc2 on Intel Little Valley 2. There are some (known) problem with integrated graphical card, it is not very well supported under ubuntu. The latency test of emc2 showed no errors.
Regards Klemen --- On Fri, 5/30/08, Kirk Wallace <[EMAIL PROTECTED]> wrote: > From: Kirk Wallace <[EMAIL PROTECTED]> > Subject: Re: [Emc-users] Mini-itx Control > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Date: Friday, May 30, 2008, 5:59 PM > On Fri, 2008-05-30 at 15:56 +0300, Alex Joni wrote: > > well this wouldn't be an OT message if you put up > some latency-test numbers, > > or descriptions how well it worked with EMC.. > > > > Regards, > > Alex > > > > ----- Original Message ----- > > From: "Hugues Belanger" > <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Friday, May 30, 2008 2:39 PM > > Subject: [Emc-users] Mini-itx Control > > > > > > > Hi All > > > > > > doing a little advertising > > > > > > > http://barrie.kijiji.ca/c-buy-and-sell-computers-VIA-EPIA-800-Mini-ITX-all-in-one-512M-RAM-Power-supply-W0QQAdIdZ54215130 > > > > > I have had trouble getting Linux to run on my C3 ITX board, > but that was > quite a while ago. I would be interested in knowing if > anyone has gotten > EMC2 or Linux to run on one of these. It would make a nice > low power > router/gateway or EMC2 remote. > > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC/EMC CNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending > Craftsman AA 109 restoration > Shizuoka ST-N/EMC CNC) > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
