Good thinking, Dan. I've been bitten quite a few times by both tool table stuff and variables stuff that got saved.
Rayh On Sat, 2008-05-10 at 08:20 -0400, Organic Engines wrote: > Hi, > > Just a heads up to new users. IF you are using a software that > calculates tool offsets, there are already some random tools in the EMC > tool table. > > So get in there and delete them or you will have some random z movements. > > I thought it was coordinate system weirdness so I was using the MDI to > zero everything until it occurred to me to check the tool table. > > Dan > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
