Thank John, Steven & Alex. a. obviously I don't read very well. ;-)
b. I now get green numbers. :-) Dave On Jan 29, 2008, at 2:19 PM, Stephen Wille Padnos wrote: > Dave Engvall wrote: > >> [snip] >> >> Alex ... is there a way to get hal-show stuff to a text page w/o >> retyping? >> >> > Use halcmd instead ;) > > Halcmd has shell-like globbing, so you can do things like: > halcmd show sig "*step" > halcmd show funct motenc (shows all functions that start with > "motenc") > halcmd show pin "axis-*pos" > > etc. > > If you're using an installed EMC2, just run a terminal and you can use > the commands above. > > - Steve > > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
