Hi Richard, Try the comm routine .... once the communications are proved to be working everything should fall in place. HTH
Dave On Jan 26, 2008, at 12:11 PM, Chris Radek wrote: > On Sat, Jan 26, 2008 at 12:38:42PM -0700, Sebastian Kuzminsky wrote: >> >> From your debug file: >> >> insmod: error inserting '/usr/realtime-2.6.15-magma/modules/emc2/ >> hal_ppmc.ko': -1 Operation not permitted >> >> >> Looks like you forgot to become root. How did you start EMC? Did >> you >> run emc as root or as a regular user? >> > > This is the wrong advice. You should not run EMC as root. > > The actual problem is the ppmc card is not being found. > > [ 2481.719059] PPMC: checking EPP bus 0 at port 0378 > [ 2481.719065] PPMC: slot 0: ID code: 04 Unknown! (ERROR) > ...... > [ 2481.719299] PPMC: slot 15: ID code: 04 Unknown! (ERROR) > [ 2481.719309] read cache bitmap: 00000000 > [ 2481.719311] write cache bitmap: 00000000 > [ 2481.719314] PPMC: shutting down > > Check your wiring, check your parport is in EPP mode, etc. > > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
