You could well ask The institute of Chemical Engineering, https://www.icheme.org/

On 2025-04-13 21:56, Matthew Wilson | GBE wrote:
Hello, excuse me asking but we have been asked about finding an expert, preferably based around south / south-east UK, who could provide guidance on determination of safety features required on systems that use organic solvents and various gases like CO2 & oxygen.  To me as loads of possible risks come to mind like flammability and pressure hazards, toxicity, maybe even asphyxiation!  Perhaps ATEX too?

This is, however, beyond our capabilities, but I did say I would try to see.  So, any suggestions most welcome please.

Thanks & regards to you all.


Disclaimer:​​​​ This email and any files transmitted with it are confidential 
and intended solely for the use of the individual or entity to whom they are 
addressed.
​If you have received this email in error please delete it from your system, do 
not use or disclose the information in any way and notify the sender 
immediately.
​The contents of this message may contain personal views which are not the 
views of the company, unless specifically stated.
​
​GB Electronics (UK) Ltd is a company registered in England and Wales under 
number 06210991.
​Registered office: Ascot House Mulberry Close, Woods Way, Goring By Sea, West 
Sussex, BN12 4QY.

------------------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to EMC-PSTC@LISTSERV.IEEE.ORG

All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/emc-pstc@listserv.ieee.org/

Website: https://ewh.ieee.org/soc/pses/
Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf

For help, send mail to the list administrators:
Mike Sherman at: msherma...@comcast.net
Rick Linford at: linf...@ieee.org

For policy questions, send mail to:
Jim Bacher at: j.bac...@ieee.org

------------------------------------------------------------------------

To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1

--
Best wishes John Woodgate RAYLEIGH Essex OOO-Own Opinions Only www.woodjohn.uk If something is true: * as far as we know - it's science *for certain - it's mathematics *unquestionably - it's religion

--
This email has been checked for viruses by AVG antivirus software.
www.avg.com

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
EMC-PSTC@LISTSERV.IEEE.ORG

All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/emc-pstc@listserv.ieee.org/

Website:  https://ewh.ieee.org/soc/pses/
Instructions:  https://ewh.ieee.org/soc/pses/list.html (including how to 
unsubscribe)
List rules: 
https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf

For help, send mail to the list administrators:
Mike Sherman at: msherma...@comcast.net
Rick Linford at: linf...@ieee.org

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1

Reply via email to