One annoyance with the HB rating is many materials manufacturers just state “HB” and not “HB40 or “HB75”.
EN 62368-1 asks for different HB ratings depending on thickness. If the manufacturer doesn’t provide the nuanced info then one has to assume the worst All the best James James Pawson Managing Director & EMC Problem Solver Unit 3 Compliance Ltd EMC : Environmental & Vibration : Electrical Safety : CE & UKCA : Consultancy <http://www.unit3compliance.co.uk/> www.unit3compliance.co.uk | <mailto:[email protected]> [email protected] +44(0)1274 911747 | +44(0)7811 139957 2 Wellington Business Park, New Lane, Bradford, BD4 8AL Registered in England and Wales # 10574298 Office hours: Every morning my full attention is on consultancy, testing, and troubleshooting activities for our customers’ projects. I’m available/contactable between 1300h to 1730h Mon/Tue/Thurs/Fri. For inquiries, bookings, and testing updates please send us an email on [email protected] <mailto:[email protected]> or call 01274 911747. Our lead times for testing and consultancy are typically 4-5 weeks. From: Richard Nute <[email protected]> Sent: 23 November 2024 22:24 To: [email protected] Subject: Re: [PSES] Calling all UL 61010 experts Some years ago, I sought to see the differences between the ratings, V0, V1, and V2. The V stands for a test of a vertical oriented specimen. HB stands for a test of horizontal burning oriented specimen. As I recall, the HB rating was based on the rate of burn, less than 40 mm per minute, for the horizontal oriented specimen. HB material burns until it is consumed. V-rated material self-extinguishes at some time after ignition. Based on UL 94, I put together the attached chart to determine the V0, V1, and V2 differences. Note that the only difference between V1 and V2 is that V2 has flaming drops. Best wishes for the Thanksgiving holiday, Rich _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] <mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ <https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] <mailto:[email protected]> Rick Linford at: [email protected] <mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected] <mailto:[email protected]> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 -- This email has been checked for viruses by AVG antivirus software. www.avg.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
