Hi Brian, You will find similar procedures for Permissive Changes in ISED RSP-100
https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/devices-and-equipment/radio-standards-procedures-rsp/rsp-100-certification-radio-apparatus-and-broadcasting-equipment Larry K. Stillings Compliance Worldwide, Inc. Test Locally, Sell Globally and Launch Your Products Around the World! FCC - Wireless - Telecom - CE Marking - International Approvals - Product Safety 357 Main Street Sandown, NH 03873 (603) 887 3903 Fax 887-6445 complianceworldwide.com<https://complianceworldwide.com> <https://complianceworldwide.com> Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it. From: Brian Gregory Sent: Thursday, February 22, 2024 1:55 PM To: [email protected] Subject: [PSES] ISED Requirements for Self-Declaration of Conformity Hello fellow EMC Nerds, I had posted a time or two on our EMC issues with a unit that has a class B certified WiFi/BT module. With improved results compared to the originally approved unit, we've been able to attest to compliance via the SELF DECLARATION of CONFORMITY (SDoC) process as defined in the FCC guidance documents for our unit under the Class 1 Permissive Change (C1PC) rules, re: Part 47 / ยง 15.101. Does ISED have a similar SDoC process for Canadian compliance for devices qualifying under FCC C1PC rules? thanks, Colorado Brian ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected]<mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
