Hi Brian, Do you know which ICES standard applies to your product? You can start here <https://ised-isde.canada.ca/site/certification-engineering-bureau/en/wireless-equipment-standards-knowledge-center/equipment-standards-and-certification-overview> if you don’t know quite where to start.
If you know what ICES standard applies, you’ll find the requirements for labelling and declaration in the relevant document. Here’s the link to that part of the ISED website <https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/devices-and-equipment/interference-causing-equipment-standards-ices> in case you don’t have it yet. A good place to start is with the documents RSS-Gen, General Requirements for Compliance of Radio Apparatus <https://www.ic.gc.ca/eic/site/smt-gst.nsf/vwapj/RSS-Gen-i5-A2-2021-02EN.pdf/$FILE/RSS-Gen-i5-A2-2021-02EN.pdf>, and ICES-Gen, General Requirements for Compliance of Interference-Causing Equipment <https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/devices-and-equipment/interference-causing-equipment-standards-ices/ices-gen-general-requirements-compliance-interference-causing-equipment>. Doug Nix Kitchener, Ontario, Canada [email protected] +1 (519) 729-5704 > On Feb 22, 2024, at 13:54, Brian Gregory <[email protected]> wrote: > > > Hello fellow EMC Nerds, > > I had posted a time or two on our EMC issues with a unit that has a class B > certified WiFi/BT module. With improved results compared to the originally > approved unit, we've been able to attest to compliance via the SELF > DECLARATION of CONFORMITY (SDoC) process as defined in the FCC guidance > documents for our unit under the Class 1 Permissive Change (C1PC) rules, re: > Part 47 / § 15.101. > > Does ISED have a similar SDoC process for Canadian compliance for devices > qualifying under FCC C1PC rules? > > thanks, > > Colorado Brian > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > [email protected] > > All emc-pstc postings are archived and searchable on the web at: > https://www.mail-archive.com/[email protected]/ > > Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> > Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to > unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> > List rules: https://ewh.ieee.org/soc/pses/listrules.html > > For help, send mail to the list administrators: > Mike Sherman at: [email protected] <mailto:[email protected]> > Rick Linford at: [email protected] <mailto:[email protected]> > For policy questions, send mail to: > Jim Bacher at: [email protected] <mailto:[email protected]> > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
