Hello Amund 2 years is normal transition period. So once standard EN IEC 62368-1:2023 +A11 +A12 will be adopted as harmonised standard, there will be a transition period where both editions will be harmonised.
Best regards Boštjan Poslano iz Outlook za Android<https://aka.ms/AAb9ysg> ________________________________ From: Amund Westin <[email protected]> Sent: Wednesday, November 1, 2023 12:07:05 PM To: Boštjan Glavič <[email protected]>; [email protected] <[email protected]> Subject: SV: [PSES] SV: [PSES] EN 62368-1 : 2014 Thanks Boštjan Have I understood correctly, that EN62368-1:2014 will be valid for a minimum of 2 more years, whether EN62368-1:2023 will soon be approved & harmonized or not? BR Amund Fra: Boštjan Glavič Sendt: 1. november 2023 11:42 Til: [email protected] Emne: Re: [PSES] SV: [PSES] EN 62368-1 : 2014 Amund, TC108X responsible for EN IEC 62368-1 established WG6, to work on comments from HAS consultants (they do assessment of draft standards for EU commission). Currently comments received on CD/CDV version of EN IEC 62368-1:2023. We still wait for assessment of FDIS. However, WG6 prepared answers to HAS consultants (3 consultants, one for LVD, one for RED and one for GPSD). I hope we will get some more info on the TC108X meeting end of November. I hope we can get new harmonised standard end of 2024. Therefore EN 62368-1:2014 will remain valid for min 2 more years in EU. Best regards, Boštjan Boštjan Glavič Vodja laboratorija za elektroniko / Head of Laboratory Varnost in elektromagnetika / Safety and Electromagnetics SIQ Ljubljana, Mašera-Spasićeva ulica 10, SI-1000 Ljubljana, Slovenija T: +386 1 4778 265 M: +386 41 391 283 [email protected]<mailto:[email protected]>; www.siq.si<https://www.siq.si/> [SIQ]<https://www.siq.si/> To elektronsko sporočilo je namenjeno izključno naslovniku. Pravno obvestilo.<https://www.siq.si/pravno-obvestilo-za-prejemnike-elektronske-poste/> The information transmitted by this email is intended only for the person or entity to which it is addressed. Disclaimer.<https://www.siq.si/en/legal-notice-for-e-mail-recipients/> [SIQ Facebook]<https://www.facebook.com/SIQLjubljana/> [SIQ LinkedIn] <https://www.linkedin.com/company/siq> [SIQ YouTube] <https://www.youtube.com/channel/UCURzJFvP5CDVtL_vdvWjbQA/featured> From: Charlie Blackham <[email protected]<mailto:[email protected]>> Sent: Wednesday, November 1, 2023 9:11 AM To: [email protected]<mailto:[email protected]> Subject: Re: [PSES] SV: [PSES] EN 62368-1 : 2014 CAUTION: This email originated from outside of our organisation. Do not click links or open attachments unless you recognise the sender and know the content is safe. Amund If a standard is listed in the OJ, it continues to provide a “presumption of conformity” even it has been “withdrawn” by the standards committee. The 2020 version of 62368-1 will not be listed in the OJ The 2023 version of 62368-1 was rejected by the EU Commission but it looks as though CENELEC voting will see it published anyway. IEC test reports and CB certificates are not required for CE marking and they remain valid in other countries until those national authorities have withdrawn them Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Amund Westin <[email protected]<mailto:[email protected]>> Sent: Wednesday, November 1, 2023 7:08 AM To: [email protected]<mailto:[email protected]> Subject: [PSES] SV: [PSES] EN 62368-1 : 2014 Hi all Any news about the future standing for the EN62368-1 : 2014? My understanding is that EN62368-1 : 2020 is still not listed in OJ, even though it should replace EN62368-1 : 2014 in June 2024. In parallel, EN62368-1 : 2023 is still under work and what do we expect as a date to replace 2014 and 2020 version? In our case, we have a CB test certificate & report according to EN62368-1 : 2014 and would hope it would be valid at least a year or two more. BR Amund Fra: Scott Xe Sendt: 8. desember 2022 10:12 Til: [email protected]<mailto:[email protected]> Emne: Re: [PSES] EN 62368-1 : 2014 Dear All, Thanks for your comments! It said version 4 will be issued in 2023 and hope there is less chance to have amendments during the extension period. Best regards, Scott On Thu, 8 Dec 2022 at 00:42, Scott Xe <[email protected]<mailto:[email protected]>> wrote: CENELEC recently extended DoW for 18 months from 06/01/2023 to 06/07/2024. What are the impacts on importers/manufacturers, test houses and market surveillances? EN 62368-1 : 2014 is still valid for LVD/RED in EUOJ. All the relevant products should follow this version for EU markets. What is the point of this change to them? In general the test houses give unclear interpretations to their clients in this aspect. Sometimes, they follow EUOJ requirements but sometimes CENELEC. Some importers/manufacturers also confuse which requirements to follow. Some countries also may not adopt the latest IEC/EN standard as their national standards. Can't withdrawn standards be used? Thanks and best regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
