Amund If a standard is listed in the OJ, it continues to provide a “presumption of conformity” even it has been “withdrawn” by the standards committee.
The 2020 version of 62368-1 will not be listed in the OJ The 2023 version of 62368-1 was rejected by the EU Commission but it looks as though CENELEC voting will see it published anyway. IEC test reports and CB certificates are not required for CE marking and they remain valid in other countries until those national authorities have withdrawn them Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Amund Westin <[email protected]> Sent: Wednesday, November 1, 2023 7:08 AM To: [email protected] Subject: [PSES] SV: [PSES] EN 62368-1 : 2014 Hi all Any news about the future standing for the EN62368-1 : 2014? My understanding is that EN62368-1 : 2020 is still not listed in OJ, even though it should replace EN62368-1 : 2014 in June 2024. In parallel, EN62368-1 : 2023 is still under work and what do we expect as a date to replace 2014 and 2020 version? In our case, we have a CB test certificate & report according to EN62368-1 : 2014 and would hope it would be valid at least a year or two more. BR Amund Fra: Scott Xe Sendt: 8. desember 2022 10:12 Til: [email protected]<mailto:[email protected]> Emne: Re: [PSES] EN 62368-1 : 2014 Dear All, Thanks for your comments! It said version 4 will be issued in 2023 and hope there is less chance to have amendments during the extension period. Best regards, Scott On Thu, 8 Dec 2022 at 00:42, Scott Xe <[email protected]<mailto:[email protected]>> wrote: CENELEC recently extended DoW for 18 months from 06/01/2023 to 06/07/2024. What are the impacts on importers/manufacturers, test houses and market surveillances? EN 62368-1 : 2014 is still valid for LVD/RED in EUOJ. All the relevant products should follow this version for EU markets. What is the point of this change to them? In general the test houses give unclear interpretations to their clients in this aspect. Sometimes, they follow EUOJ requirements but sometimes CENELEC. Some importers/manufacturers also confuse which requirements to follow. Some countries also may not adopt the latest IEC/EN standard as their national standards. Can't withdrawn standards be used? Thanks and best regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
