Matthew

I think the issue is, again, one of enforcement – the UK General Product Safety 
Regulations impose requirements on both manufacturers and importers, so there 
is existing legislation that could be used.

Best regards
Charlie

Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946 624317
Web: https://sulisconsultants.com/
Registered in England and Wales, number 05466247

From: Matthew Wilson | GBE <[email protected]>
Sent: Friday, July 28, 2023 10:11 AM
To: [email protected]
Subject: [PSES] BBC news article re Li-ion batteries...

I thought this news article that was on the BBC TV broadcast bulletins 27th 
July might be of interest.

“Batteries for e-bikes should be regulated in the same way as fireworks, heavy 
machinery or medical devices because of the fire risk they pose, a charity [UK 
based Electrical Safety First] has said”

https://www.bbc.co.uk/news/technology-66304564


[cid:[email protected]][cid:[email protected]]
Disclaimer:​ This email and any files transmitted with it are confidential and 
intended solely for the use of the individual or entity to whom they are 
addressed.
​If you have received this email in error please delete it from your system, do 
not use or disclose the information in any way and notify the sender 
immediately.
​The contents of this message may contain personal views which are not the 
views of the company, unless specifically stated.
​
​GB Electronics (UK) Ltd is a company registered in England and Wales under 
number 06210991.
​Registered office: Ascot House Mulberry Close, Woods Way, Goring By Sea, West 
Sussex, BN12 4QY.
________________________________

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to All 
emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20>

Website: https://ewh.ieee.org/soc/pses/
Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to 
unsubscribe)<https://ewh.ieee.org/soc/pses/list.html>
List rules: https://ewh.ieee.org/soc/pses/listrules.html

For help, send mail to the list administrators:
Mike Sherman at: [email protected]<mailto:[email protected]>
Rick Linford at: [email protected]<mailto:[email protected]>

For policy questions, send mail to:
Jim Bacher at: [email protected]<mailto:[email protected]>

________________________________

To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/[email protected]/

Website:  https://ewh.ieee.org/soc/pses/
Instructions:  https://ewh.ieee.org/soc/pses/list.html (including how to 
unsubscribe)
List rules: https://ewh.ieee.org/soc/pses/listrules.html

For help, send mail to the list administrators:
Mike Sherman at: [email protected]
Rick Linford at: [email protected]

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1

Reply via email to