Hello Brian, I can only partly answer your questions. See article 52, “Transitional provisions”. It notes that EU member states must accept products declared to 2006/42/EC until 14 January 2027, so there is a fairly long transition period. However, there is additional information on the transition of market surveillance and safeguard procedures under the new Directive (Chapter VI) with a date of 13 July 2023.
I expect the European Commission to update this webpage<https://single-market-economy.ec.europa.eu/single-market/european-standards/harmonised-standards/machinery-md_en> in the near future. Hopefully, they will include guidelines for the new Machinery Directive on that page. Best regards, Ted Eckert The opinions expressed are my own and do not necessarily reflect those of my employer. From: Brian Kunde <[email protected]> Sent: Friday, June 30, 2023 10:54 AM To: [email protected] Subject: [EXTERNAL] Re: [PSES] EU Machinery Regulation official version Is there a good source of information on the application of this new directive? Are there any good articles or summaries comparing the new directive to the old? Are there implementation dates? Can we declare compliance to the new directive now, or are their other hurdles that need to be put into place? Is there a source for good comments and discussion on this? I have only just started to dig into it. Thanks to all. The Other Brian On Thu, Jun 29, 2023 at 2:12 PM Lauren Crane <[email protected]<mailto:[email protected]>> wrote: FYI – now published in the OJ -- https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32023R1230 Best Regards, -Lauren LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files, or previous e-mail messages attached to it, (collectively, "E-mail Transmission") may be subject to one or more of the following based on the associated sensitivity level: E-mail Transmission (i) contains confidential information, (ii) is prohibited from distribution outside of Lam, and/or (iii) is intended solely for and restricted to the specified recipient(s). If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this message is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender and destroy the original transmission and its attachments without reading them or saving them to disk. Thank you. Confidential – Limited Access and Use - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
