Hi All, In Canada, the list of accredited inspection bodies can be found on the Standards Council of Canada website: https://www.scc.ca/en/accreditation/programs/inspection-bodies/directory
Doug Nix [email protected] +1 (519) 729-5704 > On Feb 24, 2023, at 14:26, [email protected] <[email protected]> wrote: > > Thanks for your help Richard. I have an excellent contact at MET and I've > referred her to this friend. This is good info. > > It's been many years (decades) since I've dealt with the differences in > provincial code requirements, but I'm aware of the fact that's a pitfall to > watch out for. > > Carl > > > ------ Original Message ------ > From "Richard Nute" <[email protected] <mailto:[email protected]>> > To [email protected] <mailto:[email protected]> > Date 2/22/2023 6:33:12 PM > Subject Re: [PSES] Non-NRTL Field Inspection Service Provider in the Michigan > / Midwest Region > >> >> Hi Carl: >> >> I’m not able to identify candidate FEBs as you requested. Most NRTLs, small >> to large, also are FEBs. I only found one accredited FEB who wasn’t an >> NRTL, SGS in Switzerland (a very big company). >> >> Here is a good and complete (straight-forward) explanation of the field >> inspection service in the USA and Canada: >> >> https://metlabs.com/services/on-site-field-testing-and-evaluation/field-inspection-frequently-asked-questions/ >> >> Here is one of the field evaluation body, FEB, accreditation schemes: >> >> https://www.iasonline.org/services/field-evaluation-bodies/ >> >> The FEB must be acceptable to the AHJ in the region where the equipment is >> to be installed. >> >> Rich >> >> >> From: [email protected] <mailto:[email protected]> <[email protected] >> <mailto:[email protected]>> >> Sent: Wednesday, February 22, 2023 2:16 PM >> To: [email protected] <mailto:[email protected]> >> Subject: [PSES] Non-NRTL Field Inspection Service Provider in the Michigan / >> Midwest Region >> >> A friend asked me if I could refer him to a field inspection service >> provider for computer/ITE products intended for use within factory >> environments. I'm aware that the major NRTLs offer this service apart from >> their NRTL accreditation, so I'm asking for other referrals for smaller >> service providers. >> >> The scope is for USA and Canadian installations and this company would like >> that source to provide engineering review of the product in question in >> advance of the inspection, as well as the inspection itself and tag as >> needed. >> >> Thanks in advance, >> >> Carl > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
