Rich I’m looking at a similar project myself
>The FEB must be acceptable to the AHJ in the region where the equipment is to >be installed. Are there published lists anywhere, or is it a case of asking the relevant AHJ? Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Richard Nute <[email protected]> Sent: 22 February 2023 23:33 To: [email protected] Subject: Re: [PSES] Non-NRTL Field Inspection Service Provider in the Michigan / Midwest Region Hi Carl: I’m not able to identify candidate FEBs as you requested. Most NRTLs, small to large, also are FEBs. I only found one accredited FEB who wasn’t an NRTL, SGS in Switzerland (a very big company). Here is a good and complete (straight-forward) explanation of the field inspection service in the USA and Canada: https://metlabs.com/services/on-site-field-testing-and-evaluation/field-inspection-frequently-asked-questions/ Here is one of the field evaluation body, FEB, accreditation schemes: https://www.iasonline.org/services/field-evaluation-bodies/ The FEB must be acceptable to the AHJ in the region where the equipment is to be installed. Rich From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> Sent: Wednesday, February 22, 2023 2:16 PM To: [email protected]<mailto:[email protected]> Subject: [PSES] Non-NRTL Field Inspection Service Provider in the Michigan / Midwest Region A friend asked me if I could refer him to a field inspection service provider for computer/ITE products intended for use within factory environments. I'm aware that the major NRTLs offer this service apart from their NRTL accreditation, so I'm asking for other referrals for smaller service providers. The scope is for USA and Canadian installations and this company would like that source to provide engineering review of the product in question in advance of the inspection, as well as the inspection itself and tag as needed. Thanks in advance, Carl - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
