In order to judge if there is no risk of electric shock from charged capacitors, it is required to measure the voltage across L and N of mains plug after the removal of power input. To avoid grounding loop between test equipment and the unit under test, an isolating transformer is strongly recommended. I have learnt another way by using Add Function and two hot probes of a dual channel DSO. Can someone advise which way is more common in safety conformity test. Especially the latter one, I have not tried it yet before and appreciate any notes I must take in the measurement.
Thanks and regards, Scott > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
