Hi All, Is there any document or other source that explains how the requirements & limits were chosen in the 62368 Hazard Based Standard?
Barring that, I believe members of this list participated in that standard's development. I would appreciate if you would like to discuss. I am also open to a SME providing consulting services. For the latter, it would be best to unicast to me rather than reply to the entire group (per the IEEE emc-pstc guidelines, as I understand them). Thanks,[email protected][email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
