Hi Everyone, I'm looking to acquire a spectrum analyzer for initial near-field emissions testing during early product design stages. Essentially I want to uncover potential design issues earlier in the design process, prior to an EMC pre-scan. At this stage, something inexpensive that can measure above 10 GHz would be preferred.
Does anyone have a recommendation for a good budget spectrum analyzer model and/or places to buy them? All the best, Parth Jain (he/him), Principal Hardware Engineer Cortex Design Inc. | 888-317-0722 ext.708 | www.cortex-design.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
