Doug, I haven't attended any of your presentations or seminars, or looked at your website recently. But I did remember one of your postings back in Aug 2021. Here's what you said, plus my comment (plus many others commented as well).
8/19/21 DOUG I am currently working on a new video using my home built EMP generator. Nothing like a 1000 Ampere, 15 kV high voltage pulse to spice up the day! I am also working on a Marx generator to get extremely high voltage pulses as well. If you don’t hear anymore from me, I may have been vaporized. 8/19/21 MY COMMENT Uh, let's see ... 1,000 A x 15,000 V = 15,000,000 W. Not sure about the gain or directivity but that's alot of power! Hopefully it's just a pulse or two in the microsecond range. And hope you're in the desert. Don't know what state you're referring to, but my guess is that this is the device you demonstrated. Manny Barron On Tue, May 10, 2022 at 3:24 PM doug emcesd.com <[email protected]> wrote: > Hi All, > > > > Did you know there is one US state that has immunity regulations > applicable to ESD (it is not an ESD test itself)? It is a state very > concerned with extreme equipment reliability and your equipment has to pass > this test if you want to sell to customers in a specific industry in that > state. Which one? It is the most intense immunity test I have seen. I was > demonstrating the test during a presentation to 70 engineers in Fullerton, > CA last week. I was one of several speakers. All except me were recorded. > Shortly into my demonstrations, I performed the test using a chair as a > target for demo purposes. From 15-20 feet away, the demonstration took out > the camera and my presentation was not recorded from that point! If you > want to see how good a design is, this is a great test. > > > > If you have attended one of my presentations/seminars, please do not post. > I want to see how well known the state with an EMC rules making > organization is. This is typical of the many kinds of unusual material I > teach. > > > > Doug > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
