Hi All, Did you know there is one US state that has immunity regulations applicable to ESD (it is not an ESD test itself)? It is a state very concerned with extreme equipment reliability and your equipment has to pass this test if you want to sell to customers in a specific industry in that state. Which one? It is the most intense immunity test I have seen. I was demonstrating the test during a presentation to 70 engineers in Fullerton, CA last week. I was one of several speakers. All except me were recorded. Shortly into my demonstrations, I performed the test using a chair as a target for demo purposes. From 15-20 feet away, the demonstration took out the camera and my presentation was not recorded from that point! If you want to see how good a design is, this is a great test.
If you have attended one of my presentations/seminars, please do not post. I want to see how well known the state with an EMC rules making organization is. This is typical of the many kinds of unusual material I teach. Doug [cid:[email protected]] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
