Fully agree on such design. However the bag of adapters should be optional so the user will obtain it when needed to avoid e-waste.
Rgds, Scott On Wed, 26 Jan 2022 at 23:07, Bill Owsley <[email protected]> wrote: > We handled the power cords as separate items with their own approvals. > And depending on the country the product was being shipped to, the correct > power cord was added to shipment. > If a citizen is moving a product from country to country, it is their > problem to get the correct power cord for country receptacles. > The flexibility of detachable power cords allows for the mixing and > matching. > If a product design is such that a detachable power cord is not available, > well, get creative with a bag of adapters. > If a product has the power cord wired into the device, it becomes a > country specific device, or it gets a bag of adapters to fit into whatever > country it is in. > > > On Wednesday, January 26, 2022, 09:38:45 AM EST, [email protected] < > [email protected]> wrote: > > > In general understanding, products bearing CE Mark are free movement in > the EU. I doubt how can they do it. For example, a Euro plug is fitted in > the product. How can it operate in Ireland where UK plug is common? Do > the products mark the CE Mark incorrectly or must the products comply with > all national deviations in the LVD standard (some EPSs do supply different > plugs but costly & not common on products)? Did I miss something in the > requirements to look after this scenario? Appreciate the guidance to read > the requirements correctly! > > > > Thanks and regards, > > > > Scott > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
