That is to say the manufacturers are liable to supply the right plug with the product for the market to be placed, not necessary for all 27 markets. If the user moves the product to another country, the user is liable to adopt a correct converter.
Thanks and regards, Scott On Wed, 26 Jan 2022 at 22:47, <[email protected]> wrote: > Scott > > > > In the UK (don’t know about Eire) the law (UK Plug & Socket Regs 1994 > https://www.legislation.gov.uk/uksi/1994/1768/made) Clause 9 require that > an appliance with a non-UK plug be supplied with a suitable “conversion > plug” that does meet UK requirements and will fit a standard UK 13A socket. > Suitable “conversion plugs” are widely available in the UK. > > > > John E Allen > > W. London, UK > > *From:* [email protected] <[email protected]> > *Sent:* 26 January 2022 14:39 > *To:* [email protected] > *Subject:* <SPAM> [PSES] CE marked products > > > > In general understanding, products bearing CE Mark are free movement in > the EU. I doubt how can they do it. For example, a Euro plug is fitted in > the product. How can it operate in Ireland where UK plug is common? Do > the products mark the CE Mark incorrectly or must the products comply with > all national deviations in the LVD standard (some EPSs do supply different > plugs but costly & not common on products)? Did I miss something in the > requirements to look after this scenario? Appreciate the guidance to read > the requirements correctly! > > > > Thanks and regards, > > > > Scott > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
