On Thu, Jun 10, 2010 at 1:02 AM, Gary Smith <[email protected]> wrote: > Hi, > > Haven't been on the air much, the K3 has been unplugged & antennae > disconnected just to protect against lightning possibilities. Last I > used the rig, I was mostly on the lower bands, rarely 15 meters or > above. > > just for fun I went to check my butternut HF9V to see if there were > any issues on the bands and when I went to 12 meters I get ERR PL 1 > and on 10 meters I get the same flash message and there's no > transmit. 6 meters is fine as are all other bands. this is confined > to 12 & 10 meters. > > I reloaded the current firmware and get the same result. I used the > elecraft utility to calibrate the transmit thinking that might be the > issue but it failed when it got to 24Mhz. > > Idears?
You might need to do this: http://www.elecraft.com/K3/mods/ELECRAFT_Application_Note_KSYN3_ALC_Rev_A.pdf but k3support [at] elecraft.com might have better ideas too... GL! ~Iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
