Hi, Haven't been on the air much, the K3 has been unplugged & antennae disconnected just to protect against lightning possibilities. Last I used the rig, I was mostly on the lower bands, rarely 15 meters or above.
just for fun I went to check my butternut HF9V to see if there were any issues on the bands and when I went to 12 meters I get ERR PL 1 and on 10 meters I get the same flash message and there's no transmit. 6 meters is fine as are all other bands. this is confined to 12 & 10 meters. I reloaded the current firmware and get the same result. I used the elecraft utility to calibrate the transmit thinking that might be the issue but it failed when it got to 24Mhz. Idears? Thanks, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
