> The boards as designed by EA3BLQ did not provide a "line out" audio
> signal,
That is not correct. The EA3BLQ "Digital Interface" board (K2DI v. 3)
provides a buffered/amplified signal from J5 (demodulator output before
the volume control). This is the definition of a "line out" signal.
While not quite the same as Tom's board (Don's design), the EA3BLQ
"K2DI" board is functionally identical on receive and provides for PTT
microphone switching/muting that is missing in Don's design. The
K2DI board can be used on a stand alone basis if one does not need the
"digital mode VOX" (e.g. "tone switching") or transformer input/output
isolation provided in the K2DI-PCI daughter board.
73,
... Joe, W4TV
On 6/7/2010 1:01 PM, NQ3RP wrote:
>
> Guy -
>
> The boards as designed by EA3BLQ did not provide a "line out" audio signal,
> so using one of his boards would not provide the type audio you are seeking.
> While Tom's (N0SS) board does provide a fixed audio, it also requires that
> you make solder connections to the Control Board of your K2. If you are
> comfortable with doing that, then I suggest you ask Tom for his files and
> have a couple of boards made. Please contact Tom @ N0SS (at) arrl.net for
> any more discussion about your needs. I'm trying to keep this discussion
> only about those that are interested in the K2DI& PCI boards, thank you.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
