I have also saved a quite number of power pole connectors with small jeweler pliers like Phil states.
Terry, W0FM -----Original Message----- From: Phil Kane [mailto:[email protected]] Sent: Monday, March 15, 2010 1:31 PM To: [email protected] Subject: Re: [Elecraft] Anderson power pole On 3/15/2010 11:07 AM, Jim Brown wrote: >> Is there a way of getting the piece of metal out of its socket > No. You've got to replace the pole. I've successfully done it > with much larger power poles that still had a wire attached, but > with the wire broken off, you'll never get it out. If the wire > were still attached, you could Please don't tell that to the several connectors that I have "rescued" with no wire attached using skill rather than force. A jewelers' needle-nose plier inserted from the rear helps. -- 73 de K2ASP - Phil Kane Elecraft K2/100 s/n 5402 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
