Hi Chris: I always like to first blame these problems on my computer. What PC program are you using with CW and RTTY? Did you arrive at the particular DX frequency by hitting a spot? Depending on your program and how the spot is listed, split information may or may not be present. Then if you accidentally bump VFO A and refresh the spot to get back on frequency you may inadvertently deactivate the SPLIT function. (Been there, done that with WriteLog).
73, Mike K2MK On a small number of occasions recently I've been working (what I believed to be) split on CW, and been embarassed to find that I've transmitted on the DX frequency. At first I put this down to senior moments, but now that I have had the same thing happen on RTTY, I am increasingly (if not totally) convinced that the K3 has reverted from split to unsplit of its own accord. Could this be a result of RF in the shack? I would appreciate advice on where to start troubleshooting. I am running the latest firmware on an unmodded K3/100 #328 with the KA3T installed. The antennas are dipoles with a common coax feed. 73 Chris, M0PSK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
