Or perhaps a small area on the screen that provides the information that is fleeting on the VFO B area. Such as power out, bandwidth, CW speed. Maybe a small dashboard where users can define what values they'd like displayed much like some of the older Garmin GPS's used to work.
This is where the term shoot the engineer came from.. ~Brett (KC7OTG) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Wayne Burdick Sent: Monday, August 17, 2009 11:58 AM To: Elecraft Reflector Subject: [Elecraft] P3 display of K3 filter bandwidth and other information The P3 is connected to the K3 at a point ahead of the crystal filters, so when you change crystal filters on the K3, it won't change the P3's displayed waveform. However, the P3 will be aware of the K3's filter bandwidth and offset, so we can show a bracketed or otherwise highlighted area on the P3 display that reflects the filter settings. We could show both the DSP and crystal bandwidth using different colors. Going farther out on a limb: The P3 could highlight ham-band edges and band segments, even by license class, programmable by country. It could mix spectral and waterfall displays with decoded text. You could assign a function switch as an auto-tune switch for PSK31 -- etc., etc. (Somebody stop me!) 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
