I like the limb you're out on. Will there be a cursor function, similar to a spectrum analyzer - or does the P3 auto-center frequency in the IF center? If the answer is yes, text display of peak/average dB of a selected signal could be done.
Maybe the cursor already exists and I just didn't see it on the face of the engineering unit at SB. 73, matt On Mon, 17 Aug 2009 11:58:05 -0700, you wrote: >The P3 is connected to the K3 at a point ahead of the crystal filters, >so when you change crystal filters on the K3, it won't change the P3's >displayed waveform. > >However, the P3 will be aware of the K3's filter bandwidth and offset, >so we can show a bracketed or otherwise highlighted area on the P3 >display that reflects the filter settings. We could show both the DSP >and crystal bandwidth using different colors. > >Going farther out on a limb: The P3 could highlight ham-band edges and >band segments, even by license class, programmable by country. It >could mix spectral and waterfall displays with decoded text. You could >assign a function switch as an auto-tune switch for PSK31 -- etc., >etc. (Somebody stop me!) > >73, >Wayne >N6KR > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
