Hello, From my side, i use HRD with good results: "server" running on the K3 side and "client" on the other side. Using Skype for audio (waiting for (future?) audio transfer included in HRD. This config is ok for voice modes but failed for data modes.(jitter, distortion etc in my conditions) I've tried also Radmin, for data modes but it's a little more bandwidth consuming.(i'm limited with a wireless internet access from remote side), and practical use is not good for me; as data decoding is done on the K3 side, results are the same as with "local" use; but as my "wireless access" is relatively slow and unstable depending of users requests, the refresh rate on the remote PC is often too long and unusable for QSO; just acceptable for RX only. I think, but i've not tested yet, that with a good internet connection, Radmin should be OK for data modes and voice modes with Skype.
73 QRO fr Rudolf, HB9ARI Gerard Jendraszkiewicz wrote: > Hello, > > Has anyone been able to remote control the K3 from a remote PC ? The > idea is to operate my station (K3) at home from a remote location (PC). > Care to share your ideas ? > > Thanks > Jerry, KE9I > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
