Brian, That is good news. Try a press of the RX ANT button too, that should work if the sub is on.
73, Don W3FPR Brian Machesney wrote: > FOUND IT!!!! > > In order for the KRX3 to get its input from the ANT2 connector, the > KRX3 input must come from the KAT3 **AND** one must set the KRX3 to > ANT2 using the B_SET button. > > Whew!!! > > Brian K1LI > > On Tue, Jan 20, 2009 at 10:46 PM, Brian Machesney <[email protected] > <mailto:[email protected]>> wrote: > > Don, > > Thanks for the help, but I'm still not with you. I want to operate > in SO2V mode with the main and sub receivers on different bands > using different antennas connected to the ANT1 and ANT2 connectors. > > I have the TMP cable connected between the KAT3 and the KRX3 > input. The TMP cable from the Aux RF BNC connector is present but > insulated, per the manual instructions, so it is inactive. > > I want the input to the KRX3 to come from the ANT2 connector. What > I need to know is how to set the configuration options to make > this happen. Obviously, the KAT3 and KRX3 CONFIG menu options are > set to something other than "notInst." The only options for the > KRX3 are "Ant-Atu" and "Ant=bnc." So, if I have the KRX3 set to > "Ant=bnc" and the KRX3 input coming from the KAT3, I would expect > the KRX3 input to come from the ANT2 connector - but it doesn't; > it still comes from the ANT1 connector. > > What am I missing? > > Brian K1LI > > > ------------------------------------------------------------------------ > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.176 / Virus Database: 270.10.10/1904 - Release Date: 1/20/2009 > 7:49 AM > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
