Brian, I am  with you.  I can connect to either of the SO-239 connectors on the 
back by routing the small piece of the TMP cable from J43 on the KAT3 to the 
KRX3 connector, but my BNC is not connected to anything.  I was told on this 
forum that there is an antenna connection to the KRX3 through one of the 
multi-pin connectors that allows all three antenna connectors to be used but I 
have not spent the time to understand just how or the limitations involved.

Connected the way that I am the ANT button selects the main receiver and 
transmitter antenna normally, but selects the KRX3 antenna when B Set is 
active.  I hope that this helps, but a tutorial from one of the Elecraft guys 
that really knows would be very welcome to me.

Willis 'Cookie' Cooke 
K5EWJ


--- On Tue, 1/20/09, Brian Machesney <[email protected]> wrote:

> From: Brian Machesney <[email protected]>
> Subject: [Elecraft] KRX3: configuration for second antenna routing
> To: [email protected]
> Date: Tuesday, January 20, 2009, 3:48 PM
> Pardon my density, but I can't figure out how to realize
> the function
> depicted in figure 3 of the K3 Owner's Manual: routing
> a signal from the
> ANT2 connector to the KRX3 through the KAT3. I don't
> see anything in the
> FAQ. Can someone, please, tell me how to configure the rig
> so that K1 and K3
> are properly actuated.
> 
> Thanks,
> 
> Brian K1LI
> K1 # 270, K2 # 3070, K3 # 2465
> _______________________________________________
> Elecraft mailing list
> Post to: [email protected]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to