Hello Jim: That pot, along with all the other trimmers in the K3, is adjusted at the factory. There are specific cautions against touching any of them in the field; all field adjustments are done in firmware.
If you have a problem with the KPA3, suggest you post a message to [email protected]. If an adjustment is needed that can be done in the field, one of the fellows there can give you specifics. Ron AC7AC -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jan Erik Holm Sent: Saturday, January 03, 2009 6:55 AM To: [email protected] Subject: [Elecraft] K3 KPA3 bias adjust I find nothing about it in any manual. R11 on KPA3 I guess. What are the specifications for the bias adjust? 73 Jim SM2EKM _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
