Thanks for the reply Dick. That's the first thing I checked and I wish that was
the problem with it's easy fix. I might also thank you now for the very useful
program which I use more often than I anticipated. Luckily this the 160 CW
contest weekend. Nothing lost yet but if I don't come up with an answer soon it
looks like I will lose lots of time when I return to Aptos.
73,
Howard..K2HK
HK
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]; [EMAIL PROTECTED]: RE: [Elecraft]
Update and another request Lost SSB after KRX3 install..Ideas?Date: Sun, 7 Dec
2008 08:03:32 -0800
Have you enabled the 2.7 kHz filter for all modes in receive using the CONFIG
FLx menu or the K3 Utility’s Crystal Filter Configuration page?
Dick, K6KR
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Howard K2HKSent:
Sunday, December 07, 2008 7:33 AMTo: [EMAIL PROTECTED]: [Elecraft] Update and
another request Lost SSB after KRX3 install..Ideas?
After sending the msg below I removed the KRX3 and also reinstalled the 2.7
filter whose position had been moved on the RF board. Neither of these made any
difference. KRX3 works as expected, CW works as usual but......no audio output
on SSB. Howard..K2HK
HK
No TX audioDate: Sat, 6 Dec 2008 18:12:28 +0000I recently installed the KRX3 in
my K3. At the same time I moved some filters and installed an additional one on
the main board . I now have the problem of no audio on SSB. Works FB on CW. I
am thinking the culprit is likely to be the 2.7KC filter on the main board.
Before opening up things again I thought I would ask for some
suggestions.Howard..K2HK HK
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
