After sending the msg below I removed the KRX3 and also reinstalled the 2.7
filter whose position had been moved on the RF board. Neither of these made any
difference. KRX3 works as expected, CW works as usual but......no audio output
on SSB. Howard..K2HK
HKNo TX audioDate: Sat, 6 Dec 2008 18:12:28 +0000I recently installed the KRX3
in my K3. At the same time I moved some filters and installed an additional one
on the main board . I now have the problem of no audio on SSB. Works FB on CW.
I am thinking the culprit is likely to be the 2.7KC filter on the main board.
Before opening up things again I thought I would ask for some
suggestions.Howard..K2HK HK
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
