Hi Fred. I have the identical setup working just fine. I think you are almost there. Probably what you missed is setting the "line-in" level. It's separate from the mic level. To do this, you have to select the MENU item "MIC SEL" and change it (with VFO A) to "Line In". Otherwise, the Mic gain control adjusts (separately, of course) the gain for the rear panel (if you have "rph" selected) or front panel (if you have "fph" selected) mic inputs. After selecting "line-in", adjust the line in level to get the ALC deflection you want using the Mic gain control. You can do this all off-air by using "Test" mode. After you have the line-in level OK for your N1MM/computer output, switch the MIC SEL back to "fph" or "rph" depending on where you want your "live" mic to go. The mic gain control can then be used to match the "live" mic level with the recorded level. Yep, it's way too complicated, but... Please let us know if that fixes your problem. 73, Barry, K6RM
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
