Tom,
Try running CAL PLL again - make certain the bottom cover is in place
and the K2 is warmed up for at least 15 minutes (preferrably for 1/2 hour).
There is alway some possibility that the PLL will not increment exactly
at target on the 5 kHz boundaries, but the effect should be minimal.
73,
Don W3FPR
Tom Harson wrote:
Hi K2 owners
I noticed for the first time this weekend during the WAERTTY contest a
clicking sound when tuning the K2 from 14081.89 to 14081.90..... Also
at 14086.89 to 14089.90. This represents a click interval of 5 Khz. I
checked several other 5 Khz intervals and the click is there...I can
detect it in 5 Khz intervals down to the bottom of the 20 meter
band... I can only hear this in the RTTY mode.. I have disabled the
DSP to see if that might be the problem, but I can still hear it. I
guess I'm unsure if the encoder is going out, or it's another problem.
Anyone else have this problem, or have the same results... The
frequency might be different on another k2 ????
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
