Gary all is well. the K2 menu has dot and bar modes, so you can set it up for either. it will take a while to find what all these settings are used for.
(push menu and look thru something that abbreviates s-meter by scrolling with the main tuning knob, then HOLD the menu button until it jumps to the right, then scroll thru options, then HOLD the menu button to accept your setting). enjoy the build and pace yourself! the HF bands should only get better so don't rush and end up with rework and troubleshooting. 73, curt --- Gary D Krause <[EMAIL PROTECTED]> wrote: > I just completed the second alignment and test of > the K2 and everything > checked out fine. I noticed that only the leading > bar is lit on the s-meter. > In other words, if the signal strength is S-9 only > that bar is lit and all > the others to the left are not. I suspect that > isn't normal however, I kind > of like it that way. Is that normal? > > Gary, N7HTS > > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ____________________________________________________________________________________ Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545469 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
