Hi Wolfgang, You could try an experiment. Disconnect your K2, put it in a household oven (not microwave oven!) at 100F for about 10-15 minutes, then remove it and reconnect to your power supply and antenna. Check the audio on 40 meters immediately upon finding a signal. If that doesn't replicate the distortion you observed, then you'll have to wait.
I'll have to think about what temperature-sensitive components might be present in the VCO that would be affected on 40 meters but not 20 meters. The varactors used in the VCO are switched depending on band, but I don't recall if 40 meters uses different varactors from 20 meters. I'll look at the schematic again. 73, Mike, K8CN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
