Hello,
I have had an occasional problem with my K2 for some time now. It is a
fully equipped K2 with a low serial number, "006xx."Most of the official
modifications have been carried out, including the "K2ATOBKit Rev E."
Regarding the fault description:
Occasionally, the audio signal in CW and SSB sounds distorted when I
turn on the K2 (VFO on 40 m).As far as I can tell, the signals sound
normal again after switching from 40 m to 20 m and back.I have not been
able to determine anything else.
Therefore, my question is:Does anyone know this behavior and know where
to start troubleshooting?
Two audio examples can be found here:
https://magentacloud.de/s/arZWnmiCcHNCcz5
<https://magentacloud.de/s/arZWnmiCcHNCcz5>
Many thanks in advance!
Wolfgang,
DL2KI
--
73 de DL2KI
http://www.dl2ki.de
DOK K08
(DL-QRP-AG #3247)
G-QRPC #13541
AGCW # 3944
HSC #1970
GnuPG:
Öffentlicher Schlüssel erzeugt am: 2012-10-27
Key-ID: 0xFB3F3B7A
Algorithmus: RSA(4096 Bit)
Fingerprint: 4530 9FCB 9D48 9B50 967C F81C 0EDB 78D9 FB3F 3B7A
Anleitung - E-Mails verschlüsseln - Free Software Foundation
https://emailselfdefense.fsf.org/de/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
