I'd much rather they replaced PSK with FT8 in the KX3. Or made an upgrade board that would do it. Until they can design and make a KX4, at least.
-=-=-=-=-=-=-=-=- 73, Gwen, NG3P On Mon, Jul 14, 2025 at 7:17 PM Jim Brown via Elecraft < [email protected]> wrote: > On 7/14/2025 12:17 PM, Gary Schulz via Elecraft wrote: > > I would also love to see synchronous AM. > > From the beginning, the K3 with the right bandpass module, and now the > K4 work great on AM in USB or LSB mode, and they're stable enough to > zero beat the carrier. I've regularly used them to verify that my > Beverages and RX loops are working. Realistically, since there's almost > nothing but talk on the AM BC band and shortwave BC is increasingly > being replaced by streaming, I'm pretty happy with 5 kHz AF bandwidth. > AND choosing between USB and LSB can often reject electronic noise that > lands on one sideband and not the other, and splatter from stations on > adjacent channels. > > 73, Jim K9YC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
