Some of the best, most useful information, comes from the group archive
(started LONG after Cady SK).
73,
Rick nk7i
On 3/17/2025 1:02 PM, Barry Baines via Elecraft wrote:
Bob:
On Mar 17, 2025, at 11:20, Bob McGraw<rmcg...@benlomand.net> wrote:
Corky:
I'd say the radio needs a transmit power calibration. The K3 Utility makes
this easy. Only a known good 50 ohm dummy load is required. Preferably
connected direct to the radio output, bypassing any switching, etc.
NEVER NEVER set the power to 50 watts! This is the point of automatic power
calibration. Thus avoid 5 watts and 50 watts as power settings. Use either 4
or 6 watts and 40 or 60 watts for your normal operation. Cold has nothing to
do with it.
This is a very interesting admonition and is something that I wasn’t aware of.
Could you point me to Elecraft documentation (or where Fred Cady, KE7X may
discuss this in his K3 book) that explains automatic power calibration and
using the 5W and 50W power settings only for calibration?
Thanks,
Barry, WD4ASW/5
Keller, TX
73
Bob, K4TAX
On 3/17/2025 11:00 AM,elecraft-requ...@mailman.qth.net wrote:
Message: 5
Date: Sun, 16 Mar 2025 15:00:09 -0700
From: Corky<af...@searlsnet.com>
To:Elecraft@mailman.qth.net
Subject: [Elecraft] Perplexing output power behavior for K3(s)
Message-ID:<5f4487fc-7b18-4ab3-a2aa-354312c93...@app.fastmail.com>
Content-Type: text/plain
I have an older K3 that has been upgraded to a K3S with the output power modification for
the P3. All this works, but I find that when I turn on the radio and then transmit on 20
m, the first TX is always about 1/2 power compared to the second and all future TX
episodes. This only seems to happen when I turn on the radio and it is "cold"
meaning at room temperature. I only have numbers for 20m, but when I did the first TX
today, the output was just under 40 W PEP with the power set at 50W. The second TX (about
2 min later) the output power was 78 W PEP and this persisted for all TX for the next
hour. Nothing was changed in the radio between the first and second TX episodes.
I do not remember ever seeing this behavior with the original boards, but it appears as
though something is "warming up" before it will transmit at full power. Does
anyone have any insight as to what might be happening and whether this is something I
need to address or just live with?
Thanks and 73,
-Corky, AF4PM
______________________________________________________________
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net
This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered tobbai...@mac.com
______________________________________________________________
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:Elecraft@mailman.qth.net
This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered torick.n...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
