"When I first connected the KAT to my system using the instructions give to me by Rob at Elecraft the KAT goes into Bypass upon power-up. What is wrong?"
Why do you assume anything is wrong? Bypass Mode, Auto mode with Bypass state, and MAN mode with Bypass state are all valid KAT500 conditions and not necessarily indicative of any problem. I'll avoid the admonishment to RTFM since the KAT500 User's Guide is still at Revision D1, August 15, 2019. This predates the firmware change that allows BYP LED to be lit at the same time as AUTO or MAN LED. If BYP is lit together with AUTO or MAN it simply means the tuner is in BYPASS state which is electrically identical (as far as the RF path is concerned) to BYP mode. Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
