On 12/27/2024 10:22 PM, Mike Seiffert wrote:
I’ve discovered that if I push the rotary pushbutton CMP/PWR knob several times, the problems I was having with the other regular push buttons (e.g. band change not changing bands but trying to do something else) seems to have improved.
That sounds like the switch on the encoder is going bad. The encoder switches and push buttons are all part of a matrix and "bad encoder switches" is a known problem with earlier S/Ns. All four of the encoders have been replaced in both of my early (~6xx and ~14xx) K3s. 73, ... Joe, W4TV On 12/27/2024 10:22 PM, Mike Seiffert wrote:
Thanks everyone for the advice and pointers. My K3 is S/N 01408, so that sounds like it is indeed an older one (inherited from my father). I’ll do a little more searching through the archives and then see what I can do. I’ve discovered that if I push the rotary pushbutton CMP/PWR knob several times, the problems I was having with the other regular push buttons (e.g. band change not changing bands but trying to do something else) seems to have improved. Cheers and 73, Mike K6STR
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
