Thank you for the clarification. On Sun, Jun 30, 2024 at 19:37 W3FPR <w3fpr...@gmail.com> wrote:
> Mike, > > It will not make any difference as long as all the band components > (crystal, capacitors, and toroids) are correct for each band. > While it is nice to have the lower band as B1 and the upper band as B2, > it is not necessary, just set each band to agree with the low/upper band > frequency in the menu. > > 73, > Don W3FPR > > On 6/30/2024 4:44 PM, Mike Short wrote: > > I have a partially assembled 20/40 kit I acquired. The directions say to > > have band 1 the lowest frequency but this one is reversed. 20 is band 1 > and > > 40 is band 2. What may be the issues with leaving it like this? > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
